·
Protected long life light emitting diode (LED)
enabling complete illumination of cylinder.
·
Length of wand
optimized for use on all common cylinders.
·
Warm white LEDs best simulate incandescent light.
·
Duplex model has
both white and ultra-violet light source in one.
·
Ultra-violet
light source meets CGA G-4.1
·
Low voltage for
use in hazardous locations.
In order for a successful visual inspection to
be accomplished, the inside of the cylinder must be illuminated. The light wand tool manufactured by Centurion
NDT utilizes state of the art technology warm white light emitting diodes
(LED). Once inserted into the cylinder,
the toggle switch energizes the light wand and the entire tank is
illuminated. This enables the inspector
to carefully look for corrosion, pitting, and foreign materials.
The white light wand is constructed using warm white LEDs which best simulate incandescent lamps. Warm white LEDs are
much less harsh than standard cool white LEDs when
used in the highly reflective area such as an aluminum cylinder.
The duplex light wand is actually two wands in one. First, the white light is the same as in the
dedicated white light wand. As the
toggle switch is actuated, either the warm white lights are lit or the ultra-violet
LEDs.
Visual inspection using ultra-violet light is
required as per the Compressed Gas Association regulation CGA G-4.1 on
cylinders used for enriched oxygen delivery.
Organic particulates such as oil or lint fibers will fluoresce when
illuminated by ultra-violet
P/N
230010 Warm White Light Wand
13.5 inches long, red color
coded handle includes power supply
P/N
230011 Duplex Light Wand Warm white and
Ultra-violet in one wand
13.5 inches long, green color coded handle includes power supply
|
Copyright © 2000 - 2011 Centurion NDT |
|