FM-140XL
Digital Conductivity Meter
Centurion NDT's FM-140XL conductivity meter makes conductivity testing simple and worry free...for most non-ferrous metal testing. Portable, yet ruggedly designed, it instantly generates readings with a bright, direct digital display, in percent IACS (International Annealed Copper Standard). To prolong battery life, readings only display when probe and testing surfaces meet.
The FM-140XL delivers precision accuracy to +/- .5% of the readings at 20° C. Included is a RS-232 port which allows the user to download information to computers, micro-controllers or other peripherals. The FM-140XL is housed in a compact, lightweight and shock resistant case for long life and durability. Placing the probe against the testing surface generates a direct conductivity reading in large brilliant LED digits. The front panel features a sorting gate, go/no-go, red or green LED display.
The FM-140XL meter is useful for sorting a wide variety of non-ferrous metals and allows,
as well as for measuring changes in physical properties affecting conductivity. Such
changes include hardening, annealing, variations in allow, heat treating, corrosion and/or
aging.
Its rechargeable Ni-Cad batteries provide up to ten hours of continuous operation from one charge. A lift-off compensation circuit easily handles rough surfaces, and compensates for probe wobble. Two test samples are mounted atop of the unit for easy set up.
| Accuracy: | +/- 0.5% at 20°C. |
|---|---|
| RS-232: | Downloads data into the user's computer, micro-controller or other peripheral. |
| Resolution: | 0.1/IACS for any reading. |
| Readout: | 4.0 digits, 0.43" (1.09 cm) seven segment LED display with fixed decimal point. Display automatically shuts off when probe is lifted from the part being tested. |
| Lift-off: | Automatic lift-off compensation circuit compensates for moderately rough surfaces and minor probe wobble. |
| Calibration: | Two case mounted set-up samples. Separate front panel control for each sample. |
| Batteries: | Two rechargeable, self-contained Ni-Cad battery packs are standard. Approximately 10 hours continuous operation on a single charge. |
| Line Operation: | May be operated on 115V 50/60 Hz line or converted to 230V 50/60 Hz. |
| Weight: | 5.0 lbs. (2.27 kg). |
| Dimensions: | 2.75" high x 8.5" wide x 9" deep (7 cm x 21.6 cm x 22.9 cm). |
| Probe: | 7/16" diameter, shielded. Probe replacement requires recalibration at factory. |
| Handle: | Multi-adjustable handle enables operator to lock unit into position for easiest viewing angle. |
| RANGE | ACCURACY | OSCILLATOR FREQUENCY |
PROBE | |
|---|---|---|---|---|
| FM-140XL | 10% to 110% | +/- 0.5% of reading | 60KHz | .437" (1.1 cm) diam. |
| Part No. 220220 | IACS | +/- 1 digit at 20°C | Part No. 220245 |
 |
OPTIONAL CARRYING CASE Part No. 519739 |
[Home | Send Mail | Table of Contents | Previous | Spec Sheet]
| Copyright © 2000 Centurion
NDT All rights reserved. |